ホーム > ブログ> Matters needing attention when forming thermoplastic reinforced plastics

Matters needing attention when forming thermoplastic reinforced plastics

December 05, 2022


 In order to solve the above-mentioned process defects of the reinforcing material, attention should be paid to the following matters when forming:


1, should use high temperature, high pressure, high speed injection.


2, the mold temperature should be high (the crystal material should be adjusted according to requirements), and at the same time should prevent the accumulation of resin glass fiber, glass fiber exposed and local burns.


3, pressure holding and shrinking should be sufficient.


4. The plastic parts should be cooled evenly.


5. The change of material temperature and mold temperature has great influence on the shrinkage of plastic parts. The high temperature and large shrinkage, the pressure holding and the injection pressure increase, the shrinkage can be reduced but the influence is small.


6, due to good thermal rigidity, high heat distortion temperature can be demolded at higher temperatures, but pay attention to uniform cooling after demolding.


7. Appropriate release agent should be used.


8, should be formed with a screw injection machine. In particular, long fiber materials must be processed by a screw type injection machine. If there is no screw type injection machine, it should be processed on a plunger type injection machine after granulation like short fiber material.


お問い合わせ

Author:

Mr. gao xiong

Eメール:

119100341@qq.com

Phone/WhatsApp:

+8613619106316

人気商品
You may also like
Related Categories

この仕入先にメール

タイトル:
イーメール:
メッセージ:

Your message must be betwwen 20-8000 characters

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信